carb. upsize decision help needed

[billysblaster]

I just bored my cylinder .50 over added a dg head pipe and dg type 11 silencer. wenting to change carb but not sure what size to go to. any sugestions and what mods do i need to do along with the carb swap.

 

[stephen12091985]

sounds like ur basically stock so i would keep the stock carb and just rejet it

 

[phragle]

a very mild port job and no airbox lid and youcan run the 34 pj no problem.

 

[fioz600r]

Get a Kiehin 28mm PWK. I got mine off ebay for 46.00...
They come on 80-85cc bikes....
You shouldnt need to do any mods to your Blaster to get a 28mm on. Well if you have the T.O.R.S. still on you will need to get rid of that and get a new throttle cable.

The stock carb is just to small for a stock Blaster...

 

[brandoz28]

i would leave the stock one on there and jet it. you're not gonna get much over stock with that pipe