So i was having problems keeping my bike wanting to run and getting it started ,... Took the carb apart long behold idrty as hell jets clogged so i replaced them. While in side the carb i realised someone stripped the head right off of the starter jet.. Was going to easyout it but the starter jet is a special order and i wanted to ride. So i put the bike back together and it runs great starts right up hot and cold does not stall and idles perfect. Now the only problem that i have noticed is when i want to get right on the throttle it will hesitate or bog down. Im not sure if I need to change my mains to richen or lean it out. Because I have tryed the air screw. When the air screw is in any other position the throttle wants to hang or will not idle. So im wondering if its this starter jet but I heard that only effects when the choke is on. So I dunno if i would need to up the size or lower the size on my other jets. I have pro circuits jet settings for the ti4 exhaust. clip position and everything is right. So Im thinking maybe a bigger or smaller jet? Any help would be appreciated thank you