buying a 200x

[bansheedave]

probably just needs a good cleaning.

 

[bansheedave]

also not having an airbox and filter on it may cause it to die like your talking. unregulated air coming in.

 

[harley1-5]

I would get an air box and filter on and clean carb.Awesome start though

 

[mud runner]

Iv got the box and cleaner I just wanted to see if it would start

 

[harley1-5]

fun trikes,im lovin mine

 

[mud runner]

well i bought some carb cleaner and some oil im gonna do an oil change and clean the carb tomorrow

 

[mud runner]

I found out why I wouldent run right the valve adjuster bolt is gone on the exaust valve

 

[bansheedave]

Daaaaang. I hope your oil filter screen in the bottom end has the bolt and nut and didn't cycle it threw the bottom end.

 

[harley1-5]

I would pull the cam cover and check in there to be safe

 

[mud runner]

Ya I'm gonna do that in a little bit

 

[mud runner]

well it was under the cam cover thak god but i do need a new gasket fot the cam cap now

 

[harley1-5]

that depends,does old 1 look ok?

 

[mud runner]

that depends,does old 1 look ok?

uh are we talking about the gasket

 

[harley1-5]

yes gasket

 

[harley1-5]

are we talking about cam cover itself or the screw on cap?

 

[mud runner]

are we talking about cam cover itself or the screw on cap?

I was talking about the cam cap not the screw in cap but I need a new gasket because this one fell apart when I pulled the cover off

 

[harley1-5]

oh sorry read it wrong,i usually keep gasket paper for those situations

 

[mud runner]

I think Iv got some gasket maker I'll use

 

[mud runner]

Do you know the specs to adjust the valve too

 

[harley1-5]

im not sure off the top off my head but I think around .015