03 blaster will idle good but as soon as you hit the throttle it dies. Stock jets bpr8es plug .010 over bore procircuit silencer stock header pipe stock reeds thanks in advance
Sounds like too much fuel, what is your main jet size currently?
dont use the bpr9es......i know of 2 people on here that tried the p plug with no luck....also the 9 stands for the heat range with is a colder plug...the 8 is hotter....put a ngk b8es,or ngks more expensive plugs that are the same as the b8es..like b8eg!!!!!!ect in it and nothing else...then start from there
B Thread diameter = 14 mm
P Construction = Projected Insulator Type
R Construction = Resistor Type
8 Heat Rating Number = Hot -> Cold
E Thread Reach = 12.7 mm
S Firing End Construction = Standard 2.6 mm diameter center electrode
I knew IT!!Alright guys I have found the problem it is a broken reed I pulled the carb off cleaned it then I stuck my finger in the carb boot felt something sticking out sideways pulled the carb boot off and the reed block out boom broken reed turns out they are all in bad shape I should have put new ones in when I rebuilt my motor but it's all okay. Going to try and get a set of Boyesen power reeds tomarrow