Decided to finally post on here, been a long time lurker so here it goes.
I cant find any pictures of it when I first got it but here is one with out cut fenders.
This is the last picture with the bike together at Sand Lake, Oregon.
And then...
I wanted to do some minor work on the cylinder to clean up the casting flaws but didn't have the tools so I just took what I had in the garage and started sanding. I used 60, 120 and 320 grit sandpaper to smooth out the exhaust port and ended with this. I will be getting some 1000 grit to polish it out today.
I cant find any pictures of it when I first got it but here is one with out cut fenders.
This is the last picture with the bike together at Sand Lake, Oregon.
And then...
I wanted to do some minor work on the cylinder to clean up the casting flaws but didn't have the tools so I just took what I had in the garage and started sanding. I used 60, 120 and 320 grit sandpaper to smooth out the exhaust port and ended with this. I will be getting some 1000 grit to polish it out today.