I am looking for a 34mm Mikuni or Keihin carb that would fit on a blaster. I have the air box and intake manifold for one but I need the carb to have an oil injection nipple on it as I am leaving the oil injection hooked up.
I know I can add one I just didn't know if anyone had one that had the nipple installed. If I decide to add one myself, where exactly do I tap it into the carb? I was told to do it right after the air boot but I'm not exactly sure. I just don't want to blow up my new engine just because I did it wrong.Yes, you can add a nipple for the oil injection.
The nipple is opening so you can hook the oil injection hose on to the carb. I have seen people tap into the carb and make it work but I don't know where exactly to tap it in. I know the pump can keep up because it runs off the rpmsIn another thread, joeak47 reported he has added injection to other carbs ?
Is this nipple not a jet ?
To spray the oil, not just pump raw oil into the airstream?
Does the blaster nipple and pump inject enuf oil for any carb ?
Too many unkowns IMO !