Search results

Hi all Last sunday went on a little ride organized by some friends We did about 61km Just wanted to show you some pics: Started at about 9am : We were in total about 30-35 bikes /atvs and some 4x4s also: We did some hills and climbed some rocky sections : On the way helped out a...

Ok So i went on a ride last sunday and after a long uphill at WOT, i stopped at the top to take some pics and noticed some smoke from the pipe looked closer and found som oil dripping from the vent hose that connects to the transmisson i continued ridding and didn't feel any problem but just...

Ok so i decided to upgrade my fronte brakes, using a Banshee setup So i got some hubs, calipers, master and lines from ebay I wanted to use the stock spindles so i had to adapt them All i had to do is build a adpadtor plate and weld it on the stock splindles First i made a test plate from...

Hi all I've been here for a few years and learned a lot from you guys but still need some advice I got my baster for almost 3 years now with no problems at all Goes good but i want a bit more I do most of my riding (about 80% ) in the winter , with lot of water crossing mudding big rutted...

Hi Just want'ed to show you all what i did last weekend. Me and some friends organize a moto and quad off-road route. here's some fotos Mine was the only blaster we had a river crossing: This is me: A few KTMs Some mega hills

ok so just wanted to show you all the kind of area i ride in about 2 miles from my house whe have this : It's a Dolmen (also called Anta or Mamoa) and was used as burial place It is dated at about 6000 years old. The top stone weighs about 15 tons Imagine building this without any...

hi all need some info here I'm want to upgrade my front drums and have a possible deal with a banshee setup, the guy selling hase the whole thing , but i don't want to buy what i don't need What I need to know is can i use a banshee hubs on the stock splindle? of couse i'll have to cut...

hi all last weekend went for a ride in the mountains with the blaster did about 90 kms in total. almost all on gravel/dirt roads Blaster worked flawless all day ! did'nt miss a beat all day ! but look's like it was the last ride for the chain and front...

Hi all I hate the stock headlight and could'nt find some aftermarket ones that i liked , and since i'm cheap... i made my own ... I'm using some old plastic pipe fittings (3/4 ") and some small 20w bulbs so i just put the bulb inside the pipe connector to hold it in i'm...

Hi all Just got a new helmet cam and dicided to share a vid with you all Still need to get the right angle but this is my first vid_: (fillmed in sunny portugal - at last!!) bye Nuno

hi all Just been doing some update on my blaster and dicided to share a small DIY very simple realy but maybe it could help somebody I'm putting a bicicle speed meter on (mainly to know the fuel range ) So I put the sensor on the brake cable like this: Had to make the wires longer : Put...

Hi all My Name ids Nuno and iv been lurkin here for a while and got lots of info on blasters Been riding street and dirt bikes for years but this will be my first atv, in the past i've had dt125lc, a yz 125,xt 600, kx 125,kx250. Now i got a XJ 900 and a xt350 So finaly going to get my 1st...