Ok so i decided to upgrade my fronte brakes, using a Banshee setup
So i got some hubs, calipers, master and lines from ebay
I wanted to use the stock spindles so i had to adapt them
All i had to do is build a adpadtor plate and weld it on the stock splindles
First i made a test plate from some tin to get the holes ansd dimensions correct :
copied it to some thicker metal and welded it to the spindle
test fit :
painted and finished and on the quad
Also made some hose holders from thin metal strips :
I also needed a spacer , for that , i used one of the old bearings , just cut the inner race in half , and you get the right size
They work great but i'll be getting some new discs as the ones that came with the hubs are in pretty bad shape
Nuno
So i got some hubs, calipers, master and lines from ebay
I wanted to use the stock spindles so i had to adapt them
All i had to do is build a adpadtor plate and weld it on the stock splindles
First i made a test plate from some tin to get the holes ansd dimensions correct :
copied it to some thicker metal and welded it to the spindle
test fit :
painted and finished and on the quad
Also made some hose holders from thin metal strips :
I also needed a spacer , for that , i used one of the old bearings , just cut the inner race in half , and you get the right size
They work great but i'll be getting some new discs as the ones that came with the hubs are in pretty bad shape
Nuno
