Search results

Ok I have a new top end bored to next oversize and a rebuilt carb with boyesen power reeds. I run premix. I want to run with airbox lid off. Stock exhaust. What size jet should I run? It currently has stock sized jet. Also If I run with the airbox lid off and a stock jet will this blow my...

Blaster starts an idles fine let warm up and as soon as i go to ride it bogs and dies. Only thing that changed was a a new exhaust gasket at the cylinder to header. Has a new top end and no air leaks. Would this gasket cause the bogging?

I assume these plastic absorber clip on things on the cylinder are for cooling. I bought a blaster that was missing all of them. Should i order new ones and install? Will it overheat without them?

Got a vitos clutch kit and installed friction plates and steels. Left off the judder spring and plate with bigger diameter. Went to push the actuator down after all installed and the clutch boss is not moving. The gear behind clutch basket is not releasing or moving at all, Actuator will push...

Ok bought a blaster with no air filter and no guide . bought the plastic guide and bolt how is the air filter supposed to go on tje boot going to carb? Do i put the plastic guide in the filter then bolt on?Is the filter supposed to wrap around entire base of tje boot going to the carb?

Ok put in new top end on this yamaha blaster from hell that I got from craigslist. This thing was hacked to sh*t when I got it. Everyrhing that could possibly be wrong with this thing has been wrong. Finally got spark after replacing stator. Had cylinder bored and honed installed piston and...

Ok so im getting 3 volts to ignition coil. No spark. New oem stator new cdi. Only thing left to replace is flyheel. Do these go bad. Lose magnetism? How do i test straight from stator that its producing enough juice. Stator ohm tests are within spec. I bought the quad with stator cover off...

Ok ive replaced everything, new oem stator, new cdi box from caltric (ebay) and still no spark. I grounded the cdi to frame and checked comtinuity tests good. Checked continuity between all wires from stator to cdi to coil. Good. Left black white wire from cdi kill switch disconnected...

Was wondering if an ignition coil from an 02 blaster would work on a 93 blaster. The 93 is a white coil and 02 is a black coil

Installed new stator and cant torque nut that holds flywheel to 54 ft lbs. Trying to hold flywheel and nut wont budge to the proper torque. Does this mean something is stripped This quad has been a nightmare! Everything that can be bad is bad. Nut feels tight just cant torque all the way. Afraid...