We use carbon fiber reeds w/ the stock cage. V-force makes one for the 90cc. I have a Uni pod w/ outerware on both. Jetting on the 24mm PWK is 130 main and I think a 50 pilot.
We run a Kasea 90 and a DRR 90, both have the Aeon 2 stork 90cc. We use the Pro Shark pipes on both as well. I don’t know much about the Cobra 100 but assume not much different other than maybe a slightly bigger bore and maybe a few mm longer crank. I do know the Cobra makes a bad ass race ready...
Gsi-mark, not sure about the pm pipe. We are using a pro shark pipe w/ good results. The “shoe spring” are located in the variator and the torsion spring goes behind that, both are rated by RPM’s. The roller weights go in the front clutch. Overall not a hard job but you will need an impact...
In addition to what has already been stated and if it is the automatic you can change the roller weights, torsion springs and front shoe springs. That is a nice upgrade. It does not improve power but it helps put that power to the ground in a hurry.
The squish clearance is large, I am running it right now and it has added better response and raise my compression from 125psi to 145psi.
What is the issues running it?
Replied to all PM’s
The 03+ caliper came w/ other parts I needed as a package deal. I have never used it or seen it in action, I am still rock’n the mechanical brakes. It looks to be in good condition, clean and the pads look new.
Rear brake caliper, don’t know much more about it. Got it in a box of goodies. And a Trenga Racing rear brake setup I got off Ebay. I could not use it w/ my nerf bars. The eBay description said that it would need rebuilt and the mounting bracket is cracked as you can see in pic.
Would like to...
I got this head when I bought a box of parts from a guy. Does anyone know anything about it?
I want to use it on my blaster, but don’t know if it will work. Blaster is ported and polished w/ standard stroke. Looks to be about 2.5mm bored in. I found a few post on here but I am not sure if...
Looking for performance parts for a 90cc 2-stroke mini quad. The bike is a 2002 Polaris Scrambler , same engine as the DRR, DRX, Apex race quad.
Parts looking for is, 20-24mm carb, aftermarket pipe, reeds w/ cage and a intake.
Let me know.
Hi all,
My buddy’s son has a Chines atv and the brass insert from the bottom of the petcock has worked its way out. It is the brass insert that goes into the petcock and into the fuel hose coming off the top of the carb. I am not sure what is used to hold the insert into the bottom of the...
That sucks she got away.
Yup Joe’s is still in place. Main Street Live is what’s happening now downtown.
Every time I am in Louisville we go to Main Street. I wake up broke and no recollection of prior events. Good times though.