Awk08

Awk08

Staff member Technician
Administrator
Messages
24,427
Media
103
Reaction score
2,292
Points
175
Joined
Last seen

Profile posts Postings Media Albums About

  • yamaha28
    Congrads for 12,000 posts!!!! btw PM me your address so I can send the axle to you.
    lasxgames
    supercross on live speed channel. Bo is at the races with MXMatt supporting our friend Dungey = Edward Jones Dome - St. Louis, MO. This is Bo's dad.

    The last 2 years RV has crashed at this race in front of our friend MXMatt who is taking photos on the track.
    __________________
    Awk08
    i do the torch trick on my plastics too, works great
    i was just bustin you for bustin me
    R
    Looking at your rear brake converson for my 02 blaster. How much is the kit? I may try to fit a brembo rear caliper from my old 04 Aprilia RSV1000. It has been lying around and I want to do something with it. Im fixing up this blaster and the stock rear brake caliper is missing the cover where the cable goes. I would rather spend the money on a upgrade rather than stock. Thanks Rodger
    9
    If you get a minute would you check my post that i posted today on the 2 1/4 turn out on the air screw it's in the carb section. One response i got was to replace the pilot jet but i thought i would see what you thought your info is always very helpful.

    Thanks
    Brent
    C
    well i got my bike runnung pretty good, but i have a slight problem now, i shered the pin that holds the flywheel in place ,, i put a new pin in and went to put t all back together and stripd the flywheel nt, can you tell me what siz nit i need to replace it? the threads on the shaft arent in 100% condition but i think they will be ok
    D
    Hey man. Ken said give you a call,on these Asr arms said you might have some tips for me. I'm stuck lol call me 7346127617 andy
    C
    hey man, i need some major help, ive never messed with 4wheelers b4 at all, i have a older yamaha blaster, at first i had no fire, i disconnected the black wire with whit stripe and then i had fire,,, i cleaned my carb twice plus extra carb,, now it will start,,,, it idles very high then dies almost like its flooded but its starts back up,,,,, the tors brain is still in tact but the tors is disconnected from throttle box and carb,,, can you help me? heres my # 270-847-3105
    bummer981
    I remember reading a thread quite a while ago saying you had the spring and ball bearing to rebuild the kick starter. Would you possibly have any more or know where I might get them. I found a rebuild kit for like ten bucks for a Banshee kicker not sure if it works for ours. I have been using a BB but being copper it fails quite quickly and I think my spring may be compressed.
    Awk08
    anytime bro
    but we could have checked with "power pros" themselves
    even though their website does not list pipes for blasters, chances are they have them, or at least a flange ???
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back