plug chop help

[gsustaitav19822]

Hello fellow blaster owners im new to thé forum i got à cuestion on jetting i did à plug shop on my blaster and im think im lean but i would like your opinion my mods are.
Pro circuit full exhaust just packted yesturday
Air box lid removal
Uni two stage filter just cleaned
Pré mix 32 -1
Stock carb
280 main
32.5 pilot
Neeble clip 3rd slot
No air leaks

 

[dirtysquared]

Can you take a pic of the plug and post it?

Temps and elevation will play a role in your jetting also. Post them up too.

 

[gsustaitav19822]

I tryed but thé pic us to big to upload us there any other way to do it

 

[gsustaitav19822]

One is 280 other 260

 

[dirtysquared]

It took me a few minutes to get the pics big! The top one is better than the bottom, but I'd go up one size main to 290 and chop it too. Its better to be a tad rich than lean.

 

[jus_me]

^^^^x2.. jump up 1 more and see what you get. Looks pretty good though.

 

[Blaaster]

#300 - #310 would be my choice they both look too lean for my liking.

I like them like this a little rich, the loss of power far exceeds the thought of a cooked piston.

 

[gsustaitav19822]

Thanks a lot guys for your help i got yets comming on thé mail got from 290-320. Once i get them i will do a nother plug shop and will update thanks for your time and help