oil cut off?

[Druhh]

if I were to cut the line for the oil resovoir would it race because of extra air? Or am I okay?

 

[speedyslyder]

you would need a vacume plug for the carb nipple.
which you can buy a whole pack at a autoparts store for 3 bucks
but it is best to do the oil injection delete the proper way

 

[Druhh]

you would need a vacume plug for the carb nipple.
which you can buy a whole pack at a autoparts store for 3 bucks
but it is best to do the oil injection the proper way

View attachment 22161

if I follow the line it goes into the bottom end

 

[speedyslyder]

i was looking for the thread but cant find it yet

you are suppose to take the oil pump off the case and remove plastic gear behind it.
alot of peeps dont but it is the proper way.

1 line feeds the pump other line pumps it to the carb.
if you remove the lines...you will need to premix the gas 32:1 ratio

take the plastic cover off and look at it...it wont loose oil or harm anything it is just a piece of plastic cover the pump

 

[Druhh]

i was looking for the thread but cant find it yet

you are suppose to take the oil pump off the case and remove plastic gear behind it.
alot of peeps dont but it is the proper way.

1 line feeds the pump other line pumps it to the carb.
if you remove the lines...you will need to premix the gas 32:1 ratio

In the bottom case here? Those 2 lines go into it.

 

[speedyslyder]

here is 2 of them search for more you need to buy a kit to do it 100% proper

http://www.blasterforum.com/threads/how-to-install-oil-injection-block-off-kit.681/

http://www.blasterforum.com/threads/how-to-remove-oil-injection-without-a-block-off-kit.3272/

 

[Druhh]

here is 2 of them search for more you need to buy a kit to do it 100% proper

http://www.blasterforum.com/threads/how-to-install-oil-injection-block-off-kit.681/

http://www.blasterforum.com/threads/how-to-remove-oil-injection-without-a-block-off-kit.3272/

I just cut the line, is that gonna cause issues?

 

[tbrooks]

Yeah, it will cause a BOOM issue eventually, you should cap the carb like shown in the pic above