Hey, I'm new to blaster forums. I bought my wife a 99 Blaster that had a blown top end due to previous owner cutting and plugging the oil injection lines and improperly mixing the gas. I am pretty mechanically inclined, however I never made any jetting changes to any carb. The quad has a stock carb, stock jets, uni air filter, stock exhaust, air box lid on, hot rod crank, the jug is getting bored to 68mm (.080 over) with a wiseco 68mm piston, it has a hotrod crank, and will also be getting boyesen pro series reeds (stock cage) due to wear/small chips, the tors system is intact with no plans to remove, and I will be correctly blocking and removing the oil injection because it is cheaper than replacing the lines and the oil pump is still a question mark if it functions properly. I will also be mixing the gas 32:1. I was wondering if the oil in the gas would cause a need for a change in jetting? I want the quad to break in properly so i don't have to spend the money to rebuild it for a while. I don't plan on going crazy with this quad, just something reliable for my wife to ride.
Sorry for the novel and thanks.
Sorry for the novel and thanks.