Need help asap. Push lever

[Blaaster]

A good sprocket and a bad chain has been the reason for the chain to throw off.

Chains and sprockets marry for life and when replaced both chain and sprockets should be replaced as a set.

I cannot help with the removal of the bearing as I have never taken on that task.

One could try the method used in removing the spigot bearing from a crankshaft.

 

[bansheedave]

you will need a blind bearing puller to get that bearing out without damage. thats the only way.

 

[Blaaster]

Why did I not think of that, i must be getting older!