Yamaha blaster. Took off tors and now there's No fuel gettin to theplug. I took tor off at the carb top and the parkin brake off and the throttle switch I've the wires under the hood and seat? Wot Coul be the problem?
blaster carb?
- Thread starter kenny Hill
- Start date
Your float may not be working. Carb may need cleaning. Problem with your petcock. If you remove the fuel line from carb does fuel run freely?
I think you mean hose/fuel line? If so than what you can do is crack the drain plug on the carb and see if fuel comes out. If not than float is stuck. Un stick float than clean float needle seat with Q tip and carb cleaner and while you are in there clean the rest of carb. No need for a carb rebuild kit, everything can be cleaned with some basic things. If fuel does happen to come out when you crack the bowl screw than float height probably needs to be adjusted. It should measure 20 - 21.5mm off the seat of the bowl gasket to the top of the float
Last edited:
Similar threads
