A arm bolt size

[BBlasterR]

I have ordered a set of bushings for my a arms. They came in the wrong size. I then ordered a bearing kit instead of bushings. They were the wrong size when they arrived. Did Yamaha upgrade the bolts at some point? The bolts that are in the machine are smaller than the bushings and bearings. The kits came from different places, but both are wrong....

 

[speedyslyder]

if you buy them from rockymountainatv or motosports ect
then they will fit.
if no one altered them.
search oem parts.
it is written in the free manual. or there is another thread also
either i could search for you or you can get your hands dirty
http://www.blasterforum.com/threads...ervice-and-owner-manuals-free-download.17325/

 

[Bluesman]

Are you missing the steel sleeves that go inside the bushings?

 

[BBlasterR]

The OD of the bushings will not fit in the ID of the A arm,nor will the OD of the bearings I purchased the second time from a different vendor.

 

[speedyslyder]

ok i did some work for
here is a diagram and stop buying from e-bay if your not sure of parts lol
not sure if it helps you but.... part numbers ect.
this is out of the parts catalog,that i listed above... that i had to save and convert to jpg

 

[BBlasterR]

I looked at a few service manuals. They all showed the same p/n. I purchased from "All Balls" the second time.

 

[BBlasterR]

I will head down to Yamaha retailer tomorrow to ask shop guys if any years are different. I may make my own kit.

 

[speedyslyder]

pics?
links?
maybe bring the arms with you?

looks like it was written already i guess i was too lazy to search
damn better then pic above

http://www.blasterforum.com/threads/yamaha-blaster-88-02-fiche-diagrams-and-part-number.41413/