Search results

I have a set. Spindles caliper everything with steel braided lines. How much you willing to pay?

If your kick starter won't return check the white sleeve that is under the spring. Mine wouldn't return and this was the problem. Hope this video helps.

I had the same problem and mine ended up being the white plastic sleeve slipped out of place where the notch goes up agains the spring. This made the thin metal washer loose and not tight up against the gear. The washer and sleeve should be tight and up against the gear. Not loose. Heres a...

So I live in Detroit and went to the 2012 North American International Auto Show and in Toyotas show area they had a Tundra Pickup that was completely sprayed in bed liner and had some DC logos on the body as well as sewn into the seats. The body panels on the side of the truck bed came out to...

Thanks! yeah I'm real lucky that she rides. she had never ridden before but loves to do so now. Check out my other videos on YouTube!

Heres another video of me riding through the Leota Trailhead open scramble area in Northern Michigan. It was a test and tune ride. JLSparky7 just rebuilt the engine for me! Thanks for watching!

Heres a video of me riding my 2002 Blaster through some property in Northern Michigan. The quad I am following is my 2004 Outlander 330 that my girlfriend is riding! Enjoy! Be sure to check my other videos. Lots of ATV videos and more to come! Rate Comment and Subscribe. Also be sure to...

Here are the notes from the machinist that measured the piston. “Upon measuring piston for proper bore size, we discovered that the piston was machined improperly. The piston should be as described, for a 67mm bore, minus the bore to piston clearance of .003” or .0762mm, which would make the...

After I first emailed rj_atv with the problem I recieved an email asking how I knew the piston was bad from and when I responded with the measurments that proved it was manufactured incorrectly I recieved no response form rj_atv. The piston is not destroyed at all. Only thing that touched it was...

Hello all, I purchased a Wiseco piston on Ebay from "rj_atv". I sent it along with my top end to be bored and the shop measured the piston and it was machined wrong from Wiseco. The clearnaces were not correct. I have all the measurments and stuff the guy from CSA performance in Almont MI...