Search results

still making the case splitter tool? if so id be more than happy to buy one! I cant find any online for the 200 blaster.

how the heck to I properly adjust the rear brake cable for the parking brake.... the hydraulic brakes work just fine but I cannot figure out the bolt on the back with the cable.... ive had the inner springs apart and everything moves freely, but I cannot seem to figure the proper way to do it...

alright thanks!

im trying to keep this on a budget so a full kit would be very expensive compared to just spacers. so what ur saying is just try and get the edges of the fronts to line up close to the edges of the rear?

I need to widen my four wheeler as I am too top heavy around corners. I am just using wheel spacers to do this so I do not have to buy extended tie rods, control arm widening kit, suspension tower widening kit, extended brake hose, etc. what I need to know is there the outside of the front tires...

I am widening the front control arms on my 06 blaster and now I need brake hoses that are +3 inches on each side, 6 inch split total. where can I buy these or have them made? or do I have to cobble something together like adding a union joint with a three inch brake line extension? I need ideas...

I disconnected both wires on the key. so it is just like there is no key. also I unplugged all connections in the TORS system. the throttle button at the thumb, the button at the carb toper, and the tors module connection

im stuck in a wiring mess. I can trace spark from the engine through the orange wire to the CDI module. somewhere after that im loosing spark, I tried swapping out the CDI module and still no spark. any help? its on an old style blaster I also unplugged the TORS module to eliminate some...

it is the old style, 88-02. I do have a spare 2006 frame though if I would need to switch out frames. also what do you mean with the +3 and +1?

I have a customer asking about upgrading his blaster. I just finished doing the following to his blaster: fully disassembled, sandblasted, repainted, and reassembled. all new bearings and bushings everywhere. new seat cover bored engine .050 over with new piston and gaskets new chain gear...