Search results

excellent! i live in the UK so ill have to order them from my local Yam dealer. bit of a misleading kit really as i thought all would be inside a rebuild kit! was hoping to have it fully rolling this weekend, guess ill have to wait until these arrive! cheers for all the help!

By the way, there are no stops inside the swing arm housing. You must just have to tap them flush with the housing

Well looking at the diagram and comparing to the parts I have... The diagram shows 18 pieces in total. I only have 12.. I can see I am missing the washers (item 7) And also items 11 and 12. The other 2 I am missing is the oil seals but I am unsure which ones I have and which I am...

Right, I'm looking at the drawing below and then I have attached what I have from pivot works. Why doesn't the kit come with everything I need? Is it possible for someone to tell me what items I now need to order so I don't make a mistake - Here's what I actually have -...

good afternoon all! i have my blaster back from the powder coaters, and the front is all built and ready! my problem is the rear now, i have a pivot works rebuild kit but i have a clue what direction what goes in. ive tried searching but im not having much luck. does anyone know...

Evening all I have a newbie question I'm looking at getting a 2+2 aftermarket axle.. I have an 02 quad. So it doesn't have a rear disc brake set up. If I were to use awk's rear gsxr brake set up, can I use the same carrier? As if I were to switch to the 03+ rear set up I would have to...

Sounds like Ken knows his stuff! Ill be sending my cylinder on a world wide trip it seems then. Cheers for the info lads. Ill start a build thread soon

Many thanks for your opinion! i fully understand where your coming from on sending the whole engine to the states, i was going to go down the stroker route if i was going to stay within the uk and send it to Ian E. i think you may have persuaded me to send my cylinders to the states and...

Hi phil Sounds cool! I'm actually a jet skier but also ride mx from time to time. I had a blaster when I was younger and this little blasty popped up on ebay and I thought ah why not! It's turned into a full strip and replace every nut and bolt! The frame is nearly done now so now I want...

ah i see! you are miles away from me! im down here in essex. i was thinking of sending my moter to Ian E Racing to have a 4mm stroker but i am unsure of his work. has anyone experienced it first hand? regards Dan

afternoon all! i notice there are a few UK riders on here.. where are you all based? where do you currently ride? and anyone have any aftermarket bits for sale? for some reason it wont let me post in the wanted section. if not, where do you currently buy your aftermarket bits...

I think I have brought the wrong bearings again! Are the pre03 carrier bearings different from the 03+? Or are they the same? Cheers Dan

Ah balls! I wondered what the extra large dust seal was for in the 02 kit.makes sense now I ordered the wrong set. Ill order a set of 03+. Why we are on the subject, is it worth upgrading the front discs to waveys whilst I'm rebuilding the fronts? Or are the stock discs ok? Cheers Dan

Right! I have a question, I hope it doesn't sound stupid. When I brought my mish mash blasty I thought it was an 03 onwards but with your help you clearly noticed it wasn't. So... The person before me fitted 03+ hydro brakes. I have stripped and repowder coated the frame and I'm...

Perfect! I was out in the garage a little today. Ground that one off and ready to bolt a new one on had to retap all the threads as the bloke has messed them all up!

These are the part numbers - 3JM-2845R-10 - 3JM-2845R-30 2XJ284213000 I've looked on the yamaha parts catalogue and none of them come up? Can anyone shed any light?

Are they all the same? As I'd like to replace it with the one I have found but as I said, the 3 I did find are all oem but have 3 different part numbers

The dog of a blasty I brought has a bent rear grab bar. Only problem is it looks to me as of it has been welded on? Are the earlier models able to swap rear bars over or has the last idiot welded this one on himself ? Are all of the grab bars the same from 88-06? I found on ebay a uk...

I've had a rethink about this blasts. I'm still going to be restoring her but rather then getting it straight and then stripping to powder coat etc I've decided to strip it back the frame, get it powder coated and then work from frame up replacing every bearing etc. So I shall keep you updated

Oh great! So I have a pre 03 blaster! Good job I didn't pay too much for this one! As I have hydro fronts.. Well kind of. There just not working yet, is it possible just to keep the pull cable style rear brake? This bike isn't going to be used for racing, just recreational riding. I...