Search results

2003 Yamaha Blaster

I know this has been asked many times. What carb should I go with and where can i find it cheap? here are my mods, Bored .60 over, weisco pistons, Trail ported, Boyseen reeds, FMF fatty, FMF powercore silencer, Reed spacer, Alum. Air box, uni filter. before the new trail port and bored .60 I...

Folks I am receiving my top end back in a day or so. here is my setup topend bored .60 over new weisco piston and rings, Trail ported, Alum. Airbox with Uni filter, Boyseen Carbon reeds, Head mod by Ken, FMF fatty, FMF powercore 2, reed spacer, However right now I am running a 30mm OKO, I have...

http://cgi.ebay.com/ebaymotors/13-3-8-RFY-Air-Shock-Absorbers-Banshee-YFZ-Warrior-ATV-/180599851832?pt=Motors_ATV_Parts_Accessories&hash=item2a0c970b38 What are your opinions on these? I have stock blaster shocks now

today I made a 4" extended swingarm using steel square stock I cut the swing between the shock and the Carriage. I used a YFZ 450 shock in the stock mounting tabs, all I did was use 2 washers for the top and at the bottom I drilled out the yfz shock and ran the stock pin and cotter key thru...

I have a 03 Blaster and I am looking for an extended swingarm. Let me know what you have thanks

Alright here is where I am at with things. I have a 2003 Blaster with A Head mod from Ken O connor, Boyseen Reeds, Reed Spacer, 30MM Carb, 14T Sproket, FMF Fatty, FMF Powercore 2, Aluminum airbox with Uni and outerwears, I have a the DYI timing advance mod, but currently have it at Stock timing...

I am in need of a stock 2003-2006 Spindle for the front left side. Mine is bent badly and need a replacement. Thanks.

Ok I have read page after page of articles on the TORS removal. I have a 2003 blaster, so 1st off I know mine is different than 02 and older. I am putting on a 30mm OKO carb. I just need to know which wires I have to cut/splice together. Please Help, Pictures are always good as well :)

I recently just got my head back from ken. I was running 4 degree advance, after installation of new head I also put the timing back to stock, Is it possible to run the 4 degree advance with the new head? Will it add even more performance?

I am wanting a used Cylinder Jug. Would like it to be stock but if mods have been done thats fine. Just message me of what you have and what you want for it. Thanks

I have purchased a YFZ rear shock and plan on putting it on my Blaster what are your thoughts? Good setup? how easy is it to install?

I just purchased a 30mm OKO carb, Before anyone says anything I understand this is a knockoff carb. But I have purchased it and im going to run it. I am wondering what jets will get me in the ball park? I have a homemade airbox no lid, 14T Sprocket Carbon Fiber reeds Reed Spacer head mod...

race ported blaster jug and pj34 mm race carb/filter | eBay browsing ebay and found this. Seems like a deal?

I have a aftermarket intake on my blaster, It uses a 2.5 inch hose. I am trying to find out what diameter a stock carb on a blaster is so I can get the correct reducer silicone hose. Thanks

I just purchased a CFM air box and Unifilter I am looking for some pictures of these things installed to get an idea of how to cut the old airbox out of the quad. Any suggestions? I was thinking about using a jig saw? Thanks guys

I am Having Ken do a head mod on my blaster. I am still running stock piston and rings. What is the best head gasket to go with?

I am in need of some upgraded suspension. I am looking to upgrade the front and rear suspension. Currently I am stock. Do you have any upgrades? Send me a message, let me know what you have and how much. THanks

I am buying a stock cylinder head to put on my blaster, These are my mods. 4 degree advance Carbon fiber Super stock Reeds Reed Spacer Uni Filter No air box lid FMF Power Core 2 silencer FMF Fatty 14t Sprocket ITP Holeshots How Much can I have milled off this head that is coming? I...

I currently have a 2003 Blaster with a 14T gear, ITP Holeshots, Uni filter with no airbox, FMF powercore 2 silencer, FMF Fatty, 4 degree advance,Super stock carbon fiber reeds, reed spacer, running a 280 Main Jet, What should my next mods be? I dont want to rip the motor apart yet...What Other...