Search results for query: Banshee axle

Ok so I have been thinking on what I should build next I have one 04 blaster Which I am porting right now. Which is not a crazy all in build it has all new bearings new crank top end tires the normal and sadly I only got the frame powder Which I wish I did all that I could but I am looking to...

...CDN) and low and behold they don’t ship to Canada so I’m still out of luck. Reason I’m looking is my uncle had given me a old Gforce banshee axle he had laying around and I was hoping to use a 03+ carrier for the swap so it’d be easy but seems like I might be out of luck. So my question is...

After much research I be decided to go ahead with project YSF250r I will be selling trx450 as soon as it’s fixed and buying a blaster. I am waiting until winter to fully start the build which will give me plenty of time to track down a cheap blaster rolling chassis or one with a blown motor in...

If you are doing a lf you do a long travel setup and buy shocks get the fireball racing arms. The American star LT arms take a 16 inch shock and the fireball takes 18 inch shocks. Worth the extra money for long shocks if you ask me.

Part of the reason I want to yz250 Swap is that a worked over blaster at the end of the day is a worked over motor. The reliability of a bone stock motor such as a yz250 is better any day. Iv also heard Yamahas 490 2 stroke bolts right into these without modification?? But I’d have a hard time...

Yah I get what your saying. My old has a 250r and it’s what a grew up on. I’m definitely getting something 2 stroke as I’m done with 4 strokes. However the cheapest 250r in my area for a while has been 5200. I have a buddy who has a blaster rolling chassis I can buy for 300$ and I can get a...

Or, you could spend about the same money and get yourself the best quad ever made, a TRX250R and trick it out a bit. 🤣 In all seriousness though, it sounds like a cool build. I would definitely want to stretch and widen a YZ250 powdered Blaster. Banshee hubs fit on the Blaster axle, so that...

Does anyone know what the oem finish is on the axle and hubs? Are they anodised or just machine finished? I’ve seen good results on the front hubs on a banshee being vapour blasted, but have no idea about the rear hubs and axle on a blaster.

I have an oem carb with TORS delete that I already tapped, and it’s set up for an aftermarket exhaust. The stock exhaust looks like sh*t (pinholes in 4 spots), and I’m starting to lean towards this being a parts blaster. The kid I got it from is the son of a VERY DEAR old friend that I haven’t...

...activity on this forum so wasn't sure if many are still on here or not! Thank you for the reply! Plan was to do a +3 swing arm with a banshee axle, 400ex shock in the rear... Front, I've been looking at the American star +3-+1 a arms but I am not all sure what else is required. Do they...

I've been casually looking at aftermarket A-Arms for my daughters Blaster here and there, mainly because the stock A-arms ball joints are not replaceable. The few I've seen don't indicate any chassis mods needed to bolt them in. But I seem to recall seeing some that recommended longer shocks? I...

...or extend it some for stability..... Looking at a arms and extended swing arm.... Have it narrowed down to go with a +3 swing arm with banshee axle etc in rear - the front end is a little foggy for me.... This is where the help is required I'd like to extended it with a arms. Was looking...

Hello everyone! So I've been a lurking member here for a few months now, but now I am able to post. (Was unable to confirm my email until today) So about 10+ years ago, I traded my FIL for this Blaster, who got it cheap at a yard sale. I had it stored in his barn and forgot all about it until...

...lined up. Put a tape in it and clearly one side of my axle is shorter than the other from hub to center of carrier. Is this normal when going to the banshee axle or did the previous owner do something wrong? I measure the a arms to make sure they sent me mating items and they were the same...

Hey buddy that’s one really nice looking setup.. was wondering what’s your sprocket sizes? Are you using the stock 40T rear? Thanks.

How well do those radiators hold up after bumps my yz250 blaster keeps breaking the radiator support. I have mine set up slightly different, I used a radiator off a ninja 300 and put it under the gas tank.

...and 10" front rolled lip aluminum wheels + Holeshot Master Tires -Amazon purchased reed -toomey b1 pipes(part of the new package) - banshee axle Advice needed: - I would like a +4 swingarm - want to make it more stable and make it fit my adult frame + I like the stance - should I...

I’ve been a lurker for a long time on this forum but I finally have a reason to post! I have a 05 with a banshee rear axle, how do I get the bearings out of the axle to replace and grease? Also I really need a rear master cylinder and I’m not sure where to pick one up at?

https://www.blasterforum.com/search/57778037/?q=Banshee+axle&o=date&c%5Bnode%5D=17

So I recently got a banshee axle and am putting it on my 01 blaster I also bought the rear brake hub and everything seems to be good but I’m unsure of this space between the brake hub and the carrier bearing is there supposed to be a space, also is that metal circle piece that originally covered...