Recent content by woodbite

Well i found the case halves were also leaking up under the carb. Got it ridable. But not quite right. The boy I bought it from is buying it back now. I told him it was sucking air in between the cases. And that i would not ride it till he gets it fixed. Or else he will prolly burn it up. So i...

Alright. Did the leak test. As soon as i put pressure on it the air come right back out at the clutch linkage seal. And i had the crankcase vent plugged.I have been thru the carb a million times now. It is driveable but not like it should be. It has no power from right off idle. The only way i...

I worked daylight to dark again today. Hope I will get to it tomorrow. Thanks for the link to the leakdown test. I am gonna pull the carb apart again tomorrow and clean with carb spray and then compressed air. Did not use the comp air on it before. And the old pilot was stopped up. And then i am...

Alright. Will do tomorrow. When I pulled the old pilot out it was clogged up solid. Cleaned with carb cleaner and installed new pilot. Thanks for the help guys..

Well Itried a 280 and a 300 main. Still same problem. Moved clip up one on needle. Same problem. If I screw the Mixture screw all the way in, it would idle good with choke on and finally Ran better with choke half on. But as soon as I took choke fully off, It would idle ok but as soon as I give...

Got off too late to work on it today. Hopefully tomorrow I will get buy the dealer and get some bigger jets. I will let yall know what fixes it. Thanks for the replies!

Could it be the 230 jet? It did seem to run better bfore i installed the jet. And since that is the only thing i changed The dealer said it shouldn't have even run with out the main jet in it. Maybe I need to go up in jet size since i have the lid off and a D&G pie and silencer? I will go buy...

D&g pipe airbox lid removed and it was bored i think 10 over.

Hi all. I bought a blaster a couple months ago. It wasn't running. The boy I bought it from put an new piston and jug on it, and couldn't get it to fire..I got it to fire finally. It was the tors. So I done away with the tors wires as per the DIY on here. Went i finally got it running, it ran...

Hey jbblaster. You gotta facebook or myspace page? We can chat on there. Maybe get together one day and ride. I got some pics of my 450r on facebook. Gotta get some more of the blaster to put on there. Having problems getting it running right. I rebuilt the carb. It didn't even have a main jet...

I live in moundville about 10 mins from tuscaloosa. Got 10 acres to ride on but can't really tear it up. Pasture land with pretty green grass. I am still working on the blaster. Bought it in peices. Got it all back together. Still ain't running quite right yet. But when i get it finished I will...

Hey guys. I am from the t-town area. Looking for some close places that are Legal to ride. Just got a 05 450r honda and an 01 blaster.Looking for somewhere to take my fiance riding...