Recent content by undergroundart

  1. undergroundart

    Blaster cr80 flat tracker

    hate to see it go. but they kids wanna stick to just mx on dirt bikes. This thing is for sale if anyone is interested
  2. undergroundart

    Extreme typhoon

    for $100 you cant lose. they seem to be a decent pit bike. not much for serious racing, but a fun toy for sure
  3. undergroundart

    c85/blaster mod

    my kids wanna stick with dirt bikes so the quads have to go. blaster frame with a 2004 cr85 engine, ported and the head was cut by eric gore. hot rod crank was put in beginning of season. single ring wiesco piston was put in 3 races ago. kehin carb bored to 29.5. full fmf exhaust. fly bars...
  4. undergroundart

    Cr85 octane/rejet?

    on a stock cr85 engine I found the best performance out of 92 pump and vp110 mixed together (%50 each) with 3oz of ames to each gallon of gas. plug chop to figure out jetting.
  5. undergroundart

    carb problems after boring

    said that wrong. one size up on the pilot and turned the screw in one full turn. might be able to go up another size on the pilot and then fine tune it with the screw still
  6. undergroundart

    carb problems after boring

    Update. got the carb pretty close to tuned. one size up on main and screw turned half a turn out was the key. also went up 2 sizes on the main. quad runs fast. my boy was right behind a 300ex built for nationals while practicing today. a few lil things and we ll be ready for the first race...
  7. undergroundart

    carb problems after boring

    hey blaster kid, good thing we didn't try to go a full 30. a hair bigger and there would be gaps on the side of the slide.
  8. undergroundart

    carb problems after boring

    right. im using a blaster cable. I just cut about 3/8 off of the metal tube on the cable where it goes into the carb. should have only done like a 1/4. I now have the slide resting on the bottom of the carb, but to do so I had to extend the idle part of the cable all the way out. once...
  9. undergroundart

    carb problems after boring

    cr85, and I think im gonna need a different cable. I looking into the carb and the slide sits pretty high up. even with the idle cable adjustment all the way closed. gonna rig up something tomorrow to the carb like a string and get the slide close to the bottom and see if it ll run. it...
  10. undergroundart

    carb problems after boring

    cleaned and blew it out twice. it runs with the choke on but not for long, and it idles super fast. its a keihin pwk. ive gone up 2 sizes on the main, and up and down on the needle. played with the air screw and idle still no luck. first race is next weekend so I just ordered another carb...
  11. undergroundart

    carb problems after boring

    shoot well that's not good news
  12. undergroundart

    carb problems after boring

    I had a 28mm carb bored to 29.5 and now I cant get the quad to run. with the choke on it ll fire but turns off as soon as you close the choke. im thinking maybe I need to go way up on my pilot. anyone ever have an issue after boring? quad started and ran great before.
  13. undergroundart

    Blaster cr80 flat tracker

    what do you mean by "offset"?
  14. undergroundart

    Blaster cr80 flat tracker

    racing starts in a month. getting the carb bored out and gonna play around with gearing, but I think we re pretty much ready.
  15. undergroundart

    teach 6 yr old

    yes teach him but just use common sense. my boy was 7 last year when he learned how to ride a 400ex. and by ride I mean he learned how to shift on it. he doesn't ride it on the track. no jumps. not going real fast. just getting used to a clutch. riding without killing it. how to start, ect..