Recent content by Keaton Smith

  1. K

    Trouble starting Yamaha Blaster 2001

    Why is that? I’ve read many times on here that either copper, or red high temp rtv works just fine.
  2. K

    Trouble starting Yamaha Blaster 2001

    Figured it out, still doesn’t start but I read the threads on the leak down test setup and built one for about $30. Major intake leak had to put some Motoseal on the intake. Then right now currently working on a leaky head gasket since I guess the gasket they gave me was trash I just put some...
  3. K

    Trouble starting Yamaha Blaster 2001

    Thank you Larry for the reply, I appreciate it I've seen you write on many posts. The problem with my wire harness is that someone before me chopped wires off so yellow/reds(for lights I believe) are snipped as well as many misc. wires which seem to be the TORS or for the Oil system which I've...
  4. K

    Trouble starting Yamaha Blaster 2001

    Yeah I know I’m understanding it more, it seems as though my cdi may be bad? But I find it hard to believe since it was just running last September and started fine until I blew the top end. I tested resistance on black/black-red on primary coil and that checked out, and then black/white-red and...
  5. K

    Trouble starting Yamaha Blaster 2001

    Okay, so first off this is completely new to me however I’m mechanically inclined. So I blew a piston and it went right out the back exhaust and rebuilt the entire engine, everything on the top end is brand new I followed YouTube videos/manuals on proper way to build it and time it. So onto my...