Recent content by edgarchavez

Thank you! Let me try that out.

Thank you! Let me try that out.

Hello, So my 97 blaster has been running fine for the past 6+ months but today when I tried to go out it started to bog out on me. I put in fresh gas mixed 40:1 with amsoil dominator and I also just cleaned the air filter. I checked the air screw its its 1.5 turns out. It had just been rebuilt...

Hello, So with my blaster, my brake light works and one type of beam works, not sure if it's low or high. But I'm wondering why the other beam won't work. What should I check/replace? Thank you!

Alright then! Thanks

Hello, So I'm putting my blaster back together and when I put the front sprocket on it went on loose even when I tightened it as much as I could. I was wondering if that's normal? And if its not how do I properly put it on or is there something wrong? By the way its a new sprocket I'm putting...

Thanks! I watched some of the videos and they seem pretty decent. Hopefully my blaster will be up and running by next week :)

Thanks mark blaster. So I checked it out and it seems there were leaks in the motor gaskets. I'm guessing the previous owner was too cheap to buy new gaskets when he did the new top and bottom end. Seems odd. Anyways, I just ordered a set and was wondering if there are any...

update, I'm planning on building a leak down tester or purchasing if anyone sells them for a reasonable price. I tried tightening all clamps and adjusting the idle but that's not the problem. It still revs up when I turn it on. Any ideas? Thanks

It has what I think is an fmf exhaust. Air box lid is off and it has a k&n filter.

Hello I'm new to the forum so I hope I posed this in the right spot. So I just bought a Yamaha blaster about 2 months ago. It's a 1997 and the previous owner did a top and bottom end before I bought it. It also had the oil injection blocked off. The owner had three hours on it since rebuilt and...