Recent content by Blastizzle

Pretty nice turn out on the hood! What is the name of the resin he used? The regular resin I use does not flex like that!

Nice job on the guards, I really need to make time and do these. They are about the only thing left I need to get done, chassis wise anyway.

Man it's been a while now since I did it. All the wires are taped up now. I'm pretty sure I used the key switch (black with white tracer) as my kill/tether. I used the yellow/red tracer for hot side of light switch and grounded the light to the frame, if the switch is illuminated you have to...

Yup but I figured why not I own it now plus I bought it like two years ago and didnt get around to building the bike 'till recently.

Yeah I was curious about those clamps. Might be a little pricey for me right now but I do remember PM'ing you a while back about this and I could'nt find the right hose to use. The ones I could find were too thick. I'll look into the intercooler piping hopefully not too expensive seeing as I...

I had this same problem. Enevitably I had to pull the cable off and pull the cable slack at the throttle side and use a drill bit and carefully drill the dimples (not all the way through)that are pinching the metal cuff around the outer plastic housing. Slide the down out of the way. About a...

Anybody out there running the full F7 exhaust (expansion pipe and silencer). I'm havin' trouble with the stock clamp working. I have it all the way tight and I can still turn it by hand, it's not real easy to turn but none the less it moves. Any ideas peoples?

Nope I eliminated the on/off and light switces. I just have that switch and a tether.

After a long time trying to find a slick, good lookin' spot to mount my light switch I figured out that the simplest thing is the best solution (brandoz28's idea actually). Here's how it turned out.