Recent content by bigred

Hey guys just looking for a bit of guidance here. I am just finishing up my build, i currently have a 34 pj that i cant get to work properly. The floats were pretty messed up and finding parts for the old pj's in canada is nearly impossible. I was running a 250R thumber and throttle cable kuz...

I'm sorry....not the big axle nut. The nuts that hold the wheel hubs on.

Hey guys, I bought a used G Force axle for my Blaster but it came with no hub nuts. I live up in Canada and shipping from Rocky Mountain ATV is $35. I was just wondering if anyone knows what the threads are on the G Force axles so I could go to the fastener store and just buy 2 nuts. Or possibly...

No, the cfm lowering blocks worked great, the shocks fit in nice the front end just sits a bit too low for my liking. I will try to get you some pictures this weekend. The blasty is in my buddys shop. Thanks again!

Hi guys, Im trying to install YFZ450 front shcoks on my 02 blaster with +3 +1 burgard a arms. I used the CFM lowering blocks with them but the bike seems to sit pretty low. I will also be installing a 250R rear shock on a +2 swing arm. I just want the bike to sit nice and even, but not too high...

I got a nice 250R rear shock and a set of YFZ450 fronts for my blaster. The 250R rear needs to be rebuilt and I am going to have the YFZ fronts internally shortened to stock blaster length. The local Arctic Cat dealer can do all the work but can't get any of the Japanese parts to rebuild the...

I will try to get some pics soon, my bike is at my buddys shop half an hour away.

I have tried to mount my FMF Fatty pipe and power core 2 silencer to my bike but the silencer mounting holes dont like up with the mounting spots on the frame!! Seems to be about an inch or so short. Im not too sure what kind of flange I used, it was one my buddy had in his shop. Could this be...

I'm pretty sure the shocks are 16 or 16 and a quarter eye to eye. They are at my buddys shop right now I can text him tomorrow to confirm.

I got a wicked deal on a set of Works shocks off a 250R back in the summer, and thinking that if I used a CFM loweing kit I would be able to make them fit on my +3+1 Burgard A Arms....wrong!! Now I am stuck with a set of Works shocks, and a brand new CFM lowering kit. My biggest issue is that I...

Hey guys a buddy of mine had a rear hydro conversion kit, that I got off him last week. I was just wodering if anyone knows where I can get the steel bracket that will let me mount a hydro caliper to my carrier, and what I need to do to my stock brake peddal to make this kit work?? any help...

Can someone help me out with jetting. I am currently collecting parts to build my Blaster. I just had the cylinder bored out to 67.5mm. I am going to do the Ken O'Conner DIY port job very soon with milled head, I have an FMF Fatty pipe and Power Core 2 silencer, UNI air filter, will be running...

Thanks, I'm sure it will be a huge improvement over the stock shock. I also got a set of dual rate works with remote resivoirs off a TRX250R that I am currently trying to figure out a mounting plan... I was thinking the CFM lowering kit, and make some aluminum bushings that will take up the play...

Hey guys my friend and I are going to be making a +2" swing arm out of a couple swing arms that I have here. I have a stock TRX250R rear shock that I will be using once we are done the mod. I was just wondering if anyone knows how far back from the swing arm bolt should I mount the shock mount...

Hey guys I just got some burgard +3 +1 a arms for my blaster. There is a set of 250R TCS shocks that are 16" long will I be able to fit these on my bike?