Recent content by Alexgiraldo3319

It was crank seal being old from stator side now running like new thank you guys for the help

Thank you guys so maybe it's because the old head gasket on its having an air leak

Thank you guys so maybe it's because the old head gasket on its having an air leak

So I was thinking and I used the 66 mm head gasket the old one after I bore the cylinder to 67mm do I have to buy the 67mm head gasket or all of them are the same size on top

yeah I didn't heat the head gasket with a torch I may just go and buy a new had gasket tomorrow and the reed gasket new and see

Let me know please guys does it matter if the head gasket after rebuild was used I put. It on or the gasket on where the reeds goes it doesn't have it matters I got another one that doesn't have it and runs amezing

an original stator and carb I clean it might be the ignition that's the only think I can think off or air leak

So I put the new stator I got spark now starts right up but keeps miss firing and Erving high

2001

Hey guys so I checked the startor clean need and all that checked the yellow with red cable and it got power and check the spar plug wire no power and I check the cdi no power on the yellow and the metal box with 2 wires blue and ball the blue one has power

I am gone check it out tomorrow I am off work and let you guys know thanks for the help

Yeah took the cover off and it looks dry

Thank you I am gone check that

Hey guys I need help I don't want to be buying stuff and no need my blaster I rebuild it put a new piston wiseco new gaskets and all has a lot of compression it's good carb redone with new jets I remove the thors well 2 weeks ago I was riding on the rain and I got into a dich full of water and...