Media added by joeak47

Navigation

  1. Yamaha Blasters 138
  2. Builds and Projects 60
  3. Parts and Accessories 21
  4. Racing 10
  5. ATV Trails 9
  6. Other ATVs 11
  7. Miscellaneous 18
    1. Auto 3
    2. Business 0
    3. Entertainment 1
    4. Home & Recreation 2
    5. In the News 0
    6. Technology 0
Browse albums

Media comments

Most media items

  1. Awk08
    103

    Awk08

  2. lasxgames
    100

    lasxgames

  3. joeak47
    98

    joeak47

  4. Blaster200boy
    93

    Blaster200boy

  5. Jonesee20
    92

    Jonesee20

Media statistics

Categories
13
Albums
1,461
Uploaded media
7,591
Embedded media
26
Comments
1,006
Disk usage
1.3 GB
Here's a good picture (no flash) that shows the gasket setting in the cut.

Here's a good picture (no flash) that shows the gasket setting in the cut.

  • 0
  • 0
The hone not to use

The hone not to use

  • 0
  • 0
installed

installed

  • 0
  • 0
No oil = lots of problems

No oil = lots of problems

  • 0
  • 0
Wiseco clearances on the box.

Wiseco clearances on the box.

  • 0
  • 0
Another piston wash picture.

Another piston wash picture.

  • 0
  • 0
Here's my piston "wash" picture... no cleaning...as pulled from the engine.

Here's my piston "wash" picture... no cleaning...as pulled from the engine.

  • 0
  • 0
Good to go.

Good to go.

  • 0
  • 0
Here's another good picture (no flash) the shows the two components and the step cut.

Here's another good picture (no flash) the shows the two components and the step cut.

  • 0
  • 0
Here is a picture after the tape was removed,paper towels pulled out of the case,and dykem (blue dye) was removed.

Here is a picture after the tape was removed,paper towels pulled out of the case,and dykem (blue dye) was removed.

  • 0
  • 0
Before and after

Before and after

  • 0
  • 0
Here is another shot of the tape job. While I was using the carbide double cut bit (6" long) I also had the hose of a small shop vacuume within an inch or two of the bit to evacuate the chips. The blue dykem is just a die I use to see my scribed lines. Other things work just as well...paint,marks-A lot pen,etc,etc.

Here is another shot of the tape job. While I was using the carbide double cut bit (6" long) I also had the hose of a small shop vacuume within an inch or two of the bit to evacuate the chips. The blue dykem is just a die I use to see my scribed lines. Other things work just as well...paint,marks-A lot pen,etc,etc.

  • 1
  • 0
The arbor that I use to cut heads.

The arbor that I use to cut heads.

  • 0
  • 0
Removing about .130 thousandths off of the head.

Removing about .130 thousandths off of the head.

  • 0
  • 0
Thumb is getting sore!

Thumb is getting sore!

  • 0
  • 0
Save a buck! A flat cd case works great! drill a hole in it.

Save a buck! A flat cd case works great! drill a hole in it.

  • 1
  • 0
Cutting an 11 degree squish band.

Cutting an 11 degree squish band.

  • 0
  • 0
Clymer manual

Clymer manual

  • 0
  • 0
Seal it with a little bit of vasoline,or grease.

Seal it with a little bit of vasoline,or grease.

  • 0
  • 0
5.1 hours on my new squish band hemi head using redline oil and stock oil injection... no cleaning...as pulled from the engine.

5.1 hours on my new squish band hemi head using redline oil and stock oil injection... no cleaning...as pulled from the engine.

  • 1
  • 0
WSM piston is just under 9 ounces with rings,pin,and circlips

WSM piston is just under 9 ounces with rings,pin,and circlips

  • 0
  • 0
Bottom

Bottom

  • 0
  • 0
Exhaust side

Exhaust side

  • 0
  • 0
Time to "CC" the chamber.

Time to "CC" the chamber.

  • 0
  • 0
Top Bottom
Back