yz490 blaster no spark Need your help

[REG490Blaster]

I made a trade a few days ago project bike for project bike. I was told it just needs spark but how can I check and make sure that all the right wires are connected. Is there a wire diagram out there for this problem

 

[Paulie B]

You should only have 3 wires coming from the motor (stator).
2 goto the CDI and 1 goes to the coil.
Off the CDI your kill switch connects.
All the wires are color coded just match them up.

 

[REG490Blaster]

Thanks ima go out here and give it a try

 

[Paulie B]

Here's a wiring diagram for ya.
It's pretty straight forward, if you have questions just ask.

 

[REG490Blaster]

i know whats wrong now. the last guy who owned the bike was using the blaster wires and not the yz wires. is there another way i can do this wiring or should i just order the yz wires

 

[darederek]

idk if u can use blaster wires but if i were u i would use yz wires the motors aren't that similar so i doubt that the harnesses are interachangable

 

[REG490Blaster]

ok cool. maybe thats why the last owner couldnt get spark then. thanks

 

[Whitty21]

sounds like a sweet bike, lets see some pics of that big boy in there, and if u get it runnin maybe a vid?

 

[Paulie B]

I just ran my own wires.
The deal with the stock blaster wiring harness is there are alot of extra wires that you don't need like the lighting.

 

[REG490Blaster]

When you gave me the diagram I was looking at it and looking at my wires I'm like there are too many wires. I just ordered a new set off ebay. But I cant wait until I get this thing started lol.