Whats next in my budget?

[Liftaxel]

Hi guys what else should I do to my blaster its a 95. Willing to spend up to $60.

Mods so far:
FMF Gold Series pipe
4+ timing (stator adjustment)
Boyesen reeds
bored .10 over
14 tooth sprocket

 

[Awk08]

Hi guys what else should I do to my blaster its a 95. Willing to spend up to $60.

Mods so far:
FMF Gold Series pipe
4+ timing (stator adjustment)
Boyesen reeds
bored .10 over
14 tooth sprocket

no UNI filter ?, airbox lid removed ? and rejet for the new airflow & powaa

 

[Wifesblaster]

KOR head mod??? AWK has some good suggestions too.

 

[Awk08]

KOR head mod??? AWK has some good suggestions too.

I like that one better

 

[Wifesblaster]

I like that one better

He needs some more work. No sleeping at KOR! 23.5 hour shifts, gotta take a lunch

 

[gizzy2014]

I like that one better

why not both???

edit: oh... i see the $60 now

 

[Liftaxel]

I have heard of the head cut. What would I have to change? Fuel? And I a ready have a outer wears cover just need a UNI.

 

[Blaaster]

Get it a bit wider for stability.

Wheel Stud spacers.

 

[Liftaxel]

Get it a bit wider for stability.

Wheel Stud spacers.

I have seen the studs before. I just didn't think they would hold up to rocky trails.

 

[Herpderplol]

They are suprisingly tough...

Head mod is the best for your money.

Do you have an aftermarket pipe? if not, save up for one

 

[Liftaxel]

They are suprisingly tough...

Head mod is the best for your money.

Do you have an aftermarket pipe? if not, save up for one

Yup FMF gold series and a cobra silencer.

Do you guys think theses would be a good buy? http://www.ebay.com/itm/3-ATV-WHEEL...Parts_Accessories&hash=item27a84a8f77&vxp=mtr

 

[Herpderplol]

Yeh, you could go with 5" if you want also

 

[Liftaxel]

Yeh, you could go with 5" if you want also

I guess I could go with a UNI air filter , Remove the air box lid and extend the rear wheels.

The front tires are flipped.

 

[dirtysquared]

Yup FMF gold series and a cobra silencer.

Do you guys think theses would be a good buy? http://www.ebay.com/itm/3-ATV-WHEEL...Parts_Accessories&hash=item27a84a8f77&vxp=mtr

I ran those spacers last year. No problems, and I put them through a beating. I did use some blue loc-tite on them when I installed them too.

You'll be happy with them

 

[Liftaxel]

I ran those spacers last year. No problems, and I put them through a beating. I did use some blue loc-tite on them when I installed them too.

You'll be happy with them

What size did you get? I have seen 3".

 

[dirtysquared]

I ran the +4's (2 inches a side) I bought them from ATV Engineering on Ebay.

 

[Liftaxel]

I ran the +4's (2 inches a side) I bought them from ATV Engineering on Ebay.

Ok I might give them a try thanks.

 

[rich1]

I have seen the studs before. I just didn't think they would hold up to rocky trails.

I would rather have a solid spacer if there are a lot of rocks and roots .

 

[Liftaxel]

I also forgot to ask you guys. I have a Hinson clutch basket but no inner hub. Do I use the stock one or do I have to buy a Hinson inner basket?

 

[bansheedave]

use your stock hub