weird!! plz help

[I2fast4u]

ok im not sure wats wrong but im goin to tell yall th full story so maybe someone can help me.
i was ridin the blaster through mud puddles n i got through it n the throttle got stuck wide open i cut it off n pushed it below my house the next day i came down n crunk it, it ran perfect i let it warm up n brought it up 2 my house n cut it off i had thought something was hanging in the carb so i took it off n cleaned it n put it bak on crunk it up n it ran for like 5 min then died n would not crank bak up but the reason it was gettin stuck wide open was because my throttle cable was bent im thinkin ive either got water in the intake or my piston is cracked

 

[ron89]

if it wont turn over by kicking or bumping it then u most likely seized it .. i think a little bit or water wont hurt it but u never no .. it may have been running lean cause u had a air leak .. what is your jetting at and are u running premix or the stock oil injection? ..

 

[I2fast4u]

im not sure wat my jetting is
im runing premix i took the oil injection off

 

[ron89]

like what size main jet u running .. how does your plug look ?..

 

[I2fast4u]

like i said i have no clue i guess stock the only thing i have done 2 da carb is put an idle kit on my plug isnt great but its gettin a little fire

 

[ron89]

okk .. mm u were prolly running lean ..cause u are running a pipe the stuff in your sig ..

 

[I2fast4u]

yea i didnt really measure it out dat day i was in a hurry lol

 

[I2fast4u]

n yea im running the stuff in my sig