I bought a s pair of Warrior front hubs, spendles and rotors, the guy said they were 99. The upper ball joint is differnt than the Blaster! When you do the up grade to disk are you having to change the upper ball joint too?
You can ream the spindle... but it's a safety risk afterwards because the original hole on the warrior hub isn't really beefy after the middle of it is made 14mm.
You could get a set of a-arms which can mount the warrior spindles on the blaster.
The best way is to change out the warrior spindles with Norman420 spindles and use the rest of the stuff off the warrior setup.
on a side note, is your avatar picture taken on the side of the pond at busco?