v force 3 reeds

[joshrabbitt14]

do you need a reed spacer or something to make these fit?

 

[bonzaiking]

no !! they fit perfect without spacer i heard you even looze power with a spacer

 

[joshrabbitt14]

do they not fit on the stock intake manifold?

 

['blanshee'man]

there is a little lip you need to cut off. i did it to mine. its no big deal

 

[bonzaiking]

yes check out my picture there is your answerI:I

 

[joshrabbitt14]

oh okay so you can cut that lip off. i was debating on wether to do that or not. thanks guys

 

[bonzaiking]

there is a little lip you need to cut off. i did it to mine. its no big deal

sorry forgot about the lip just cut it off done in 30seconds8-|

 

['blanshee'man]

yep this guy, make him go away

 

[joshrabbitt14]

yup i know what lip i was looking at it earlier and said shoot i thought i need reed spacer in between them. but what should i cut it off with?

 

[joshrabbitt14]

what should i cut it off with? i gotta thow this thing together right now

 

[98blaster+4]

razor blade and some pliers or vise grips to hold it

 

[hudack]

prob whatever woulod cut it would work just perfect

 

[fioz600r]

Dremel................... FTW

My favorite tool in the toolbox.......

Its like a swiss army knife can cover every project............

 

[Budget_Blaster]

I run a spacer with my V-FORCE3's and it hauls ass!I tried it both ways with and without and i preferred it with.I run it under the reeds to lengthen the intake runner.

 

[bonzaiking]

I run a spacer with my V-FORCE3's and it hauls ass!I tried it both ways with and without and i preferred it with.I run it under the reeds to lengthen the intake runner.

when i placed mine i was thinking about doing that to ,but i forgot later on when i'm finisht jetting i'm gona try it out to!!