ultimate break-in

[yamablaster05]

guys wanna hear something funny, well i rebuilt top end and put the bike all back together. i went to break it in and i let it warm up and started driving it. taking it easy until the bike starts to putt out so i pulled in the clutch and it shut down. first thing i think of is, o sh*t IT SEIZED. look down at the carb and the damn oil injection tube was of the CARB. but good thing its ok hooked it back up, put lube in the head, started up fine. but now i have a great excuss to get the oil injection removal kit I:I

 

[tjsdaname]

damn your lucky........

thats the first thing I check when i ride......
I do not trust it

 

[89custom]

hows the the altimate break it?

 

[blasterfreek30]

if u dont get that blockoff its going to be the real ultimate "break in" for ur ride!

 

[dalton98blaster]

i heard that wen u break in a stroke that if u wanna ride it hard u should break it in by ridin it hard, and if u wanna ride like a puss thats how u should break it in , is that true???

 

[Blasterb0y794]

No that is not true, whenever you get a your topend rebuilt you need to break it in, this is a must every time you do a topend rebuild. These are the steps that you HAVE to do, or your going to seize your engine. Here are the proper steps that you HAVE to complete if you want your rebuild to successfully work.

http://www.blasterforum.com/engine-13/how-break-two-stroke-must-done-after-top-end-rebuild-4399/