Twist throttle an won't start nnow

[Johnny22]

I have a 2002 Yamaha blaster an changed the thumb throttle to the motion pro twist throttle I put it on as instructed an now it won't start I keep reading about the tors eliminator kit or something I need help on how to remove or wat to do an I don't want to have to remove a bunch of wires can someone help please I just wanna ride again

 

[Bluesman]

Remove 3 screws on the front hood.
Remove hood.
Unplug 3 wire TORS box under hood.
Smash TORS box with a hammer.
Reinstall hood.
Start, ride, enjoy.

 

[jus_me]

^^^^ Forgot the most important thing ! Become a forum supporter or the instructions above wont work ..

 

[Blasturd]

Did you remove the TORS brick off of the top of the carb when you installed the new throttle?

 

[Herpderplol]

Did you remove the TORS brick off of the top of the carb when you installed the new throttle?

you have to. a twist throttle uses a different cable. not on the carb end only

 

[Johnny22]

Did you remove the TORS brick off of the top of the carb when you installed the new throttle?

Yes I did i had the kit I got had a new top for the carb I clipped it back in an my quad still won't get spark but also think I gutted the box

 

[Bluesman]

If you do what I posted above, it will start.

 

[Johnny22]

If you do what I posted above, it will start.

So I did wat u said I unplugged the box it fired right up but started to rev high as f*ck so I killed it an now it won't start I did try to unplug the box that was on top of the carb before

 

[Larry's Shee]

Throttle cable installed wrong, is to short, or you now have an air leak.