I was messing around on the internet and stumbled upon small turbos for motorcycles snowmobiles exc. I was thinking of the possibility of plumbing one which would take too much. Only thing is the blasters are reed valve. I was thinking of finding a donor cage and finding the right thickness sheet metal to make stiffer reeds for the high back pressure to handle maybe 1-3lbs of boost without flying backwards out the carb. They will open from forced induction,and making shure the cylinder pressure is right low enought compression to handle without making it explode and removing my legs like a gernade. Maybe bore and iron sleeve the cylinder, Of course forged piston maybe custom forged or iron rings machine the piston to accept thicker rings and some way to keep crank case, seals excetra not failing. Find a thicker casting head exc I remember seeing a reed cage one time with metal reeds installed and wonder maybe just maybe this is a possibility. Using the oil pump to oil the small turbo and just mixing in tank for piston itself. I found a old blaster for 100$ I'm thinking of using it as a guinie pig. Doe anyone have a opinion on this idea if so let me know. Thanks
Last edited: