I have a 88 Blaster 200. Sat for a couple years. I parked it because I ran out of gas then I went to college out of state and now decided to pull it back out and get it going. Got a new spark plug. New gas (32:1). Took the carb off, took the bowl off sprayed good with carb cleaner. Put it back on and it started. Put everything back together and kicked it and wouldn't start. Took the carb back off and sprayed it again. I used 2 whole cans of carb cleaner. Put it back on, started, drove it for like 3 minutes shut it off, tried to start again and same result. Took the carb off, washed it in a parts washer, made sure to blow air through all the holes, jets, etc...and got air flow through all of them, and now it won't start. Got spark and the plug was a little wet. I know some of you will probly think compression test. I haven't done that yet but shouldn't it be fine since it ran the day before? Any help would be much appreciated.
Last edited: