So F***ing mad, its fixing to be parts

[skntsqrl]

Ok at least I have an idea on where to start. I'll check all of this and get back to you guys prob be a couple of days before I get back to it. Do I have to have a flywheel puller to jack with the strator I'm new to it.

 

[slickerthanyou]

Yes to remove the flywheel you need a puller.

 

[skntsqrl]

Didnt know if there was a DIY one or not, cuz I have order one and wait on it since I live in the sticks.

 

[slickerthanyou]

Pretty straight forward, take cover off, remove nut and washer, screw the puller (counterclockwise) then using your impact gun give a couple blips it will come right off!
Be careful you don't loose the woodruff key (half moon shape), it goes back on the crank with the rounded side down!

If the woodruff key is damaged at all use a new on. It will save ya a headache in the end!

 

[PikledBeats]

here is the 03-06 specific tors write up

http://www.blasterforum.com/do-yourself-20/03-06-tors-removal-diy-41973/

 

[skntsqrl]

Alright thanks alot, I will mess with the spawn of satan later this week, on my days off since its going to get cold here this week.

 

[slickerthanyou]

here is the 03-06 specific tors write up

http://www.blasterforum.com/do-yourself-20/03-06-tors-removal-diy-41973/

Just what he wanted! AWESOME!

 

[skntsqrl]

Thanks guys for all the help I'll let you know after I start getting into it, my friends dad has a few flywheel pullers so i dont have to buy one yippy for me.

 

[89blaster89]

yeah check your reeds

 

[bigred85]

are you sure you hotwired the key to ON and not OFF?

 

[EvilElvis]

are you sure you hotwired the key to ON and not OFF?

key on the blasty is a open closed circuit if you simply unplug the 2 wires its on if you touch the wires together its off I:I