Plug chop with the right plug this time

[86_Notch]

Ken Oconnor ported motor
+3 stroker
lightened flywheel
v force reeds
factory 7 air box, no lid, uni filter
F 7 pipe
35 mm Keihin pwk

160 main jet
50 pilot
needle on the 3rd clip
air screw 1 1/2 turns out


sucker broke on me but these are all the same plug, just wanted to get a couple different views .

 

[86_Notch]

bumppittty bump ?

 

[brandoz28]

looks darker than with the 7 in it (as expected). you could try a 158 or 155 in it when it gets warmer again

 

[1995blaster]

Looks almost a tad lean to me. should be more brown.

 

[Awk08]

that looks pretty close,
if it were me, i'd bump the main up one size and see how it runs, if good, leave it
that'll cover your ass for temp swings

 

[sicivicdude]

You've not a nice mocha colored ring at the base all the way around just like you want

You can bump it for extra insurance as Awk suggested but you're ABOUT where you need to be so don't go crazy from there!

 

[86_Notch]

Thanks guys, I'll try going up a size on the main , I'd rather be safe then sorry. I'm just learning and don't wanna fry my new motor . Again, I appreciate y'alls feedback !

 

[slickerthanyou]

Looks perfect! But you already new that!