oil injection

[98blaster+4]

okay i got it all put back together, not nearly as hard as i thought
the on ly problem i had was plugging up the hose that goes to the carb
ran out of daylight so it'll have to wait till tommorow
thanks for your help everyone
also if anybody knows a real good way to plug that line ,give me a shout

 

[Justinlhc]

okay i got it all put back together, not nearly as hard as i thought
the on ly problem i had was plugging up the hose that goes to the carb
ran out of daylight so it'll have to wait till tommorow
thanks for your help everyone
also if anybody knows a real good way to plug that line ,give me a shout

Pull the hose off of the carb and plug it. It might seem like it won't come off, but yank on it and it will. Hardware stores sell those little plugs. Might want to buy a couple just to have a spare.

 

[ron89]

i just put some RTV on a screw and stuck it in the line and good to go ..

 

[98blaster+4]

what about the lines coming from the crankcase should i plug those too???

 

[FASTANDSTUPID]

The little nipple sticking out of the carb will come out if you give it a little tug.
I removed that nipple and tapped out the hole and put a #8 stainless screw with some red loctite. It won't leak and won't back out.