No Oil Pump..

[DWall11]

I was wondering if I could run my 2001 Yamaha Blaster without the oil pump...just for now...until the shop that lost my original oil pump gets it in the mail for me. For instance can I just plug off that line and just mix the fuel myself??

 

[Awk08]

if the pump is missing from inside the clutch cover, you cannot run it like that without a blockoff plate, or trans fluid will run out into the pump cover and possibly starve your trans and clutch of fluid.

you can buy or make a blockoff plate, then cap the injection nipple on the carb, and just run 32:1 mix


here's info.........
http://www.blasterforum.com/threads/how-to-install-oil-injection-block-off-kit.681/

http://www.blasterforum.com/threads/how-to-remove-oil-injection-without-a-block-off-kit.3272/

 

[03blasterboy]

I would just wait it out. awk beat me too most of the stuff but I would like to add in you would also need to change your jetting too.

 

[DWall11]

Ok. Appreciate the info..I was just getting too anxious to start this thing up cause its the last thing I need to hopefully get this thing started. This shop had lost my oil pump and now they're taking like a week and a half to get this part...and all next 2 weeks I'm gonna be busy with work and traveling

 

[Blaaster]

Wait it out, trying to rig up something to satisfy the need to ride, usually leads to many $$$$$$.

 

[DWall11]

Ok..Thank you Blaaster..yeah I've just decided to wait it out. I've just pieced everything together so that all I need to do is throw that oil pump on there and go!

 

[Blaaster]

Just remember that you have to bleed the air out!

 

[DWall11]

Ok thank you