Hey there my names jesse, I am as defined a newbie, to the blasters that is, have had many bikes, 72 tt500 and a 2002 kx250 just to name a few. I am having an issue with this blaster I bought about a week ago, and would appreciate any and all feed back. So I haven't even put an hour of ride time on it yet, but I noticed it was leaking gas from both tubes on the carb when its off and a little when its idleing, was told from the guy I bought it from that it was normal, none of my other bikes ever did that. I was curious as to what would make it do that? Sticky float maybe? Another more serious of the two questions is a miysterious oil leak that's getting on the steering assembly the exhast pip and the head I took off the front plastic cover to find a clear tube that ran down to the crank case. , ididnt experience any loss of power or any harm other than it smoked for a few min. From the head/exhaust. I really don't know where to start, I drained the oil, about 1 & 1/4 qt. Came out so I'm guessing it had plenty.. the bike runs awesome. I put oil back in it and filled to 3/4 of the view window. And rode it for about 5 min. And then it was dark. Any tips or advice would be awesome.. and another quick question.. when you do an oil change is it similar to changing the fluid on an automatic trans, where it will say its full, than you start it up and shut it down and it says it needs more? Because of the torque. Converter filling up? And in this case with the blaster would it be the clutch filling up? Again thanks for your time!