My engine was running like this

[Jakerz]

This is really bad right? :-/ Could this have blown up my motor?

 

[Blaaster]

Believe you me, I have seen heaps worse than that.

Was the carb flooding, or the motor bogging?

Is there a slosh baffle for it somewhere?

Is the clip on the needle above the tang?

How much crap was there in the float bowl?

 

[Jakerz]

Was the carb flooding, or the motor bogging?

Is there a slosh baffle for it somewhere?

Is the clip on the needle above the tang?

It was flooding when I bought it but I drained all the gas out and put new gas in that did the trick.

Slosh baffle = No

Clip in the needle : Idk

The float bowl was clean as it can get

 

[Blaaster]

The needle from the needle and seat assembly has a little wire clip that should go over the tang of the float arm.

 

[Blaaster]

The 9th pic shows the slosh baffle called here a splash guard.

http://www.blasterforum.com/do-yourself-20/how-clean-carb-36600/

 

[Jakerz]

Yeah the slosh baffle was there

 

[motoman159]

my engine ran like this....
http://www.blasterforum.com/engine-13/i-wonder-why-54994/

 

[Herpderplol]

my engine ran like this....
http://www.blasterforum.com/engine-13/i-wonder-why-54994/

Thats suprising.........