Motor Problems

Dtrap

New Member
Nov 13, 2008
23
0
0
Need some help guys,
We were out riding the other day and my brothers blaster just died. We were ridding along and it just sounded like it ran out of gas and rolled to a stop. It will start very easily and idle ok but as soon as I touch the gas it dies. I cleaned the carb and it looked fine. Checked the compression and it was 135-140 each time so I am dont really know what to check next. Please any help will be greatly appreciated.
 
imthinking it sounds like the tors mine did the same thing it would start but as soon as you touch the throttle it dies just unplug the wire to the top of the carb and the one that comes off the throttle an you should be good to go
 
I made sure the TORS was unhooked and it was. I still have the same problem with it stalling as soon as I touch the gas. Any more advice from any one. I am not really sure what to check next. What else could cause this problem? Thanks for the advice so far.