Mods
- Thread starter Blaster2001king
- Start date
i sure can't afford a pipe, wish I could.
Blaaster is there any way to make a custom performance slip on, like out of 1' steel pipe from your local hardware store.
Blaaster is there any way to make a custom performance slip on, like out of 1' steel pipe from your local hardware store.
I'd start with a good maintenance check, a good low/mid pipe, and then a head mod.. Much more could be done but I would start there.. Like anything else it will depend on the budget but those few things will be the best bang for the buck imo..
Read on how to set your squish clearance, its free and you will gain a few ponies just by getting things set how they should be in the first place..
Read on how to set your squish clearance, its free and you will gain a few ponies just by getting things set how they should be in the first place..
Do not monkey around trying to create a slip on you more than likely will loose power.
Try ebay for a pipe. You'll be surprised what you can find. I have a FMF Fatty with the flange if your interested. The finish isn't great, but has no dents. High heat paint will make it look sweet.
Wasssup.
Yeah money's to tight right now for a pipe, sh*t i still need to break down and get my breaks in "safe" working order.
Yeah money's to tight right now for a pipe, sh*t i still need to break down and get my breaks in "safe" working order.
http://www.klemmvintage.com/squish&comp.htm
I'll post up some more links. After reading a bit you should get the jist. You can shave the head with a flat hand file to adjust the ''squish" but it takes some elbow grease and a few basic tools..
I'll post up some more links. After reading a bit you should get the jist. You can shave the head with a flat hand file to adjust the ''squish" but it takes some elbow grease and a few basic tools..
Last edited:
Wow dude thanks!!
This is where adujusting timing would fall into play to get that little booger to fire on your new tdc..
Similar threads
