The kehin jetting numbers are. Lower #'s than the mikuni#'s
I run in the 160 range
Up or down according to temperature
That's with a ported stroked big bore
I ended up getting some jets for the mikuni... now I have to get a idle screw mine fell out... I'm wondering can I get the same idle screw from motion pro and just put a spring on it instead of the locknut... will it stay in with just a spring on it
I ended up getting some jets for the mikuni... now I have to get a idle screw mine fell out... I'm wondering can I get the same idle screw from motion pro and just put a spring on it instead of the locknut... will it stay in with just a spring on it
It's the idle screw in the tors delete kit... fell out dont really like the jamb nut... so was thinking about taking the spring off my keihin idle screw and putting it on the mikuni idle screw... I'm still using the stock carb
It's the idle screw in the tors delete kit... fell out dont really like the jamb nut... so was thinking about taking the spring off my keihin idle screw and putting it on the mikuni idle screw... I'm still using the stock carb