Can any one tell me how to jet my carb for the fmf sst pipe, if i need to jet it for more rich or lean???? And if i can use my stock jets.
Jetting for a new pipe
- Thread starter blaster911
- Start date
you'll need a few larger main jets, the pilot and needle should be fine where they are
i'd grab a 290 and 270 to begin with, start with the larger, then plug chop, < it is the only way to be positively sure, no one can tell you, and you sure as hell can't guess...." oh, i'll just run it, it feels fine" < that does not work
you must do it exactly as explained below, or i'll suggest a good piston for you..........
http://www.blasterforum.com/do-yourself-20/how-plug-chop-38674/
i'd grab a 290 and 270 to begin with, start with the larger, then plug chop, < it is the only way to be positively sure, no one can tell you, and you sure as hell can't guess...." oh, i'll just run it, it feels fine" < that does not work
you must do it exactly as explained below, or i'll suggest a good piston for you..........
http://www.blasterforum.com/do-yourself-20/how-plug-chop-38674/
