Hi folks,
I have just had a full engine rebuild, top end is a vito's 240 kit, the piston is now a 73mm, 0.50 oversize I think, I am running a Paul turner exhaust, pyramid reeds, port work, oil feed blocked off, tors removed. The reason for the rebuild was it was running all these mods on std jetting, and I cooked it.
Jetting specs are now
Std carb
Pilot 32.5
Needle clip 4th
Main 300
Are these jetting specs close for the mods above
???????
I have just had a full engine rebuild, top end is a vito's 240 kit, the piston is now a 73mm, 0.50 oversize I think, I am running a Paul turner exhaust, pyramid reeds, port work, oil feed blocked off, tors removed. The reason for the rebuild was it was running all these mods on std jetting, and I cooked it.
Jetting specs are now
Std carb
Pilot 32.5
Needle clip 4th
Main 300
Are these jetting specs close for the mods above
???????